Multi-state PI firm attribution is the discipline of measuring advertising results separately for each state or office a personal injury firm serves, instead of rolling every market into one number. A single blended acquisition cost looks tidy on a partner slide, but it averages together markets that behave very differently. This guide explains why multi-state PI firm attribution matters, how to set it up, and how to use it to decide where the next marketing dollar should go.

It is the market-level companion to our guide on personal injury ad spend attribution, which follows spend to the signed case campaign by campaign. Here the question is different: once you can see campaigns, how do you compare states and offices fairly? For the cost definitions, start with cost per signed case.

Multi-state PI firm attribution: separate markets each measured on spend, signed cases and fees, then compared side by side
Each market measured on its own, then compared
1
View per market,
not one national average
8
Directive types CDAI
can issue
To start
One CRM and one ad account
is enough to start

Why Multi-State PI Firm Attribution Differs From a National Average

Every state is its own advertising market. Competition for the same search terms differs, the mix of case types differs, and so does the pace at which cases resolve. A firm that spends in several states is therefore running several businesses that share a brand. Multi-state PI firm attribution gives each of them its own result.

When all spend is divided by all signed cases, a strong market can cover for a weak one. The blended figure stays acceptable while one office quietly loses money on every case it signs. The weak market is not visible because its numbers are inside the average. Multi-state PI firm attribution pulls them out.

A national average tells you how the firm is doing. It cannot tell you where. Multi-state PI firm attribution answers the where.

What One Blended Acquisition Cost Hides

  • Market competition. The same keyword can cost more in one state than another, so the media cost of a lead is not comparable across markets.
  • Case mix. A market heavy in one injury type produces a different fee profile from a market heavy in another. See case type CAC.
  • Intake performance. Offices convert contacts to signed cases at different rates. A good campaign can be blamed for a weak intake, or the reverse.
  • Time to fee. Resolution speed differs, so a younger market can look worse than an older one for reasons unrelated to marketing. Settlement lag explains the effect.
  • Vendor and compliance cost. Bought leads and the consent records behind them can differ by market. See TCPA compliance cost for law firms.

None of these is visible in a national figure. Multi-state PI firm attribution makes each one a line you can read, state by state.

Setting Up Multi-State PI Firm Attribution

The setup is mostly naming and tagging. Do these in order.

  1. Structure campaigns by market. Give each state or office its own campaign, or at minimum a clear naming convention that carries the market. The Google Ads Help page on geographic targeting explains how to limit a campaign to the areas you choose.
  2. Write the market to the CRM. Add fields for market, office, case type, signed date and source campaign. The HubSpot Knowledge Base on properties shows how, and for Salesforce, see Salesforce Help on creating custom fields.
  3. Record the signed case against its lead. The signed case must point back to the contact that produced it.
  4. Bring in the fee. Tie collected fees to the same client from billing or accounting.
  5. Keep shared costs separate. Brand, agency and overhead costs that serve every market should be allocated by a stated rule or held apart, never silently dumped on one state.

Phone leads need extra care because a call can arrive without a campaign. Capture the source when the call is logged, and use the platform tools such as offline conversion imports or Meta’s Conversions API to carry signed outcomes back, as an input to optimization.

See Each Market Earn Its Spend

Link a CRM and an ad account and see where each market stands after every cost.

Get Started

Where Each Number in Multi-State PI Firm Attribution Lives

What you needWhere it livesMatching reference
Spend by marketThe ad platform, by campaignCampaign name or ID
Leads by marketThe CRMContact ID and market field
Signed cases by officeThe CRM or case management systemMatter or client ID
Fees collectedBilling or accountingMatter or client ID
Shared costsAccountingAllocation rule you document

A Walkthrough of Multi-State PI Firm Attribution

Imagine a firm with offices in several states. The national dashboard shows an acceptable blended result. Here is how multi-state PI firm attribution tests that picture, with no figures needed to follow the logic.

  1. Split spend by state using the campaign names.
  2. Count signed cases per state using the market field in the CRM.
  3. Divide each state’s cost by its signed cases to get cost per signed case for that market.
  4. Add the fees collected in each state and subtract delivery cost and other campaign costs to reach contribution margin per market.
  5. Rank the markets, and read each against its own history as well as the others.
Per-market view
Market cost per signed case = spend in that market ÷ cases signed in that market
Market revenue = fees collected on that market’s cases
Market contribution margin = market revenue − cost to deliver the work − spend − other market costs

Often the blended view and the per-market view disagree. One market carries the others, and one drags. That disagreement is the finding. The contribution margin guide covers the formula, and true CAC explains acquisition cost when every cost is counted.

Comparing Markets Fairly in Multi-State PI Firm Attribution

A fair comparison needs rules agreed in advance. Without them, multi-state PI firm attribution turns into an argument over whose market is harder.

  • Compare like with like. Read each market against its own earlier results first, and against other markets second. A young market and a mature one should not be ranked on the same footing.
  • Separate case types. If one market is mostly one injury type, compare it with the same type elsewhere.
  • Judge on signed cases before fees arrive. Fees lag, so use cost per signed case as the early signal and collected fees as the later confirmation.
  • Match the window to the sales cycle. CDAI’s rolling window follows your sales cycle (30 days by default), which keeps a slow-resolving market from being read over too short a span.
  • Document shared-cost rules. Whatever rule you use for shared costs, apply it to every market every time.

This is a cost accounting guide, not legal advice. Rules on advertising and fees vary from state to state, so confirm each one with qualified counsel.

Decisions Multi-State PI Firm Attribution Improves

Once each market has its own result, three decisions get clearer.

  • Where to add budget. Markets that sign profitable cases earn more spend. Markets that only produce contacts get a closer look.
  • Where to fix intake. A market with strong lead volume and weak signing points to the office process, not the ad.
  • Where to open or pause. Evidence from existing markets informs whether a new state is worth a test budget.

The net marketing contribution page shows how costs roll into one figure per campaign, and the true marketing ROI guide shows how that figure feeds budget choices. For the lead-buying side, see mass tort lead aggregator economics, and for the full list of cost definitions read the marketing costs guide.

Mistakes That Undermine Multi-State PI Firm Attribution

  • One campaign serving every state. This breaks multi-state PI firm attribution at the root. Without a market in the campaign, spend cannot be split later.
  • No market field in the CRM. Multi-state PI firm attribution needs that field. Leads lose their market at intake and fall into one unlabeled pool.
  • Moving spend too fast. A market with few signed cases gives a noisy result. Wait for enough cases before treating a swing as a trend.
  • Forgetting fee timing. A newer market has fewer collected fees, which is timing and not performance.
  • Hiding unattributed revenue. Fees that cannot be tied to a market should be reported on their own, not spread across states.

How CDAI Supports Multi-State PI Firm Attribution

CDAI is Allocera Intelligence’s decision software. Connect your ad accounts and your CRM, and it lines up each campaign’s spend against the revenue that closed. When campaigns are named by market, every state or office appears as its own line. For each campaign it can attribute, CDAI:

  • Shows true cost and margin per market. True customer acquisition cost, true cost per lead and contribution margin, including the fees, payouts, refunds and compliance costs found in your data.
  • Recommends an action for each market. One of eight directives (scale, hold, cut, pause, quarantine, renegotiate, investigate or flag) with the reasons shown. The budget allocation guide explains each one.
  • Holds unlinked revenue apart. Revenue it cannot tie to a campaign is reported separately and never guessed into a state.
  • Recommends only. You make every change; CDAI does not edit your ad accounts.
  • Reviews its own calls. Earlier directives are compared with what happened afterward.

The minimum setup is one CRM (HubSpot or Salesforce) and one ad account. The free audit covers one campaign, with a 30-day lookback. For testing, CDAI ran in a simulated, controlled environment of 8 businesses (24 runs) where the true answer was known, and the per-campaign checks in that simulation showed no unexplained differences. It was then exercised on HubSpot and Salesforce developer accounts. Details are in the validation report and on the proof page. You can also browse how it works, the blog and about Allocera. If your intake team tracks calls separately, the lead quality guide, the average cost per lead page and the ROAS calculator show how those numbers can part ways with a reconciled view.

Frequently Asked Questions
What is multi-state PI firm attribution?
Multi-state PI firm attribution measures advertising results separately for each state or office a personal injury firm serves, using signed cases and collected fees, instead of one blended national figure.
Why does one blended acquisition cost fail for a multi-state firm?
States differ in competition, case mix, intake performance and time to fee. A blended figure averages them, so a strong market can cover for a weak one without anyone seeing it.
How do I set up market-level attribution?
Structure campaigns by market, write the market and source campaign to the CRM, record each signed case against its lead, and tie collected fees to the same client. Document any rule for shared costs.
How do I compare a young market with a mature one?
Read each market against its own history first and against others second. Use cost per signed case as the early signal, because fees from a newer market have not yet arrived.
Is this legal advice?
No. It is about cost accounting, not law. Each state sets its own advertising and fee rules, so ask qualified counsel in every state you serve.
What does a multi-state firm need to get started with CDAI?
One CRM, either HubSpot or Salesforce, and one ad account such as Meta or Google Ads. The free audit covers one campaign, with a 30-day lookback.

Run Multi-State PI Firm Attribution on Your Campaigns

Connect a CRM and an ad account to see which markets earn their spend after every cost.

Get Started